Specifications

• 7 inch (17.8 cm) high-definition, color touchscreen display
• Android-based operating system
• Precision-IQ firmware
• 16 GB storage
• Optional ISOBUS task controller and universal terminal
• Control up to 2 input channels and 24 sections
• Connection for one USB, plus Bluetooth® and Wi-Fi connectivity

Specifications

• 10 inch (12 cm) high-definition, color touchscreen display
• Android-based operating system
• Precision-IQ firmware
• 32 GB storage, 4 GB RAM
• Optional ISOBUS task controller and universal terminal
• Control up to 4 input channels and 48 sections
• Connection for two USBs, 1 BRR port, 3 CAN ports and support for 2 external cameras, plus Bluetooth® and Wi-Fi connectivity

Specifications

• 12 inch (30.5 cm) high-definition, color touchscreen display
• Android-based operating system
• Precision-IQ firmware
• 32 GB storage, 4 GB RAM
• Optional ISOBUS task controller and universal terminal
• Control up to 6 input channels and 48 sections
• Connection for two USBs, 2 BRR ports, 3 CAN ports and support for 2 external cameras, plus Bluetooth® and Wi-Fi connectivity

Specifications

• Large 12.1 inch (30.8 cm) high-definition, color touchscreen display
• Android-based operating system
• Precision-IQ or FmX+ firmware option
• 32 GB storage
• Customizable run screen with ability to move and turn widgets on/off
• One integrated GNSS receiver, plus ability to expand for multi-receiver operations
• Optional ISOBUS task controller and universal terminal
• Control up to 6 input channels and 48 sections
• One integrated camera with support for an additional external camera
• Connections for two USBs, ethernet and HDMI
• Ability to connect to Wi-Fi via external dongle or modem

Specifications

• Low-profile rugged housing
• Roll-corrected manual guidance
• Built-in Bluetooth® for tethering and device connections
• Two CAN ports
• SBAS or ViewPoint RTX

Specifications

• Low-profile rugged housing
• Compatible with auto-guidance when combined with a Trimble GFX display and relevant steering system
• Built-in Bluetooth® for tethering and device connections
• 5 satellite constallations
• SBAS, Rangepoint RTX, Centerpoint RTX, Centerpoint VRS and Centerpoint RTK signals

Specifications

• Newest base station receiver from Trimble Agrictulture
• Integrated 2.4/5 GHz WiFi, Bluetooth and worldwide 4G LTE modules
• IP67 water and dust protection
• Designed to survive up to a 3.6 foot (1.1 m) drop onto a hard surface
• USB-C port for data transfer/communications, plus support for USB-C power delivery for charging

Specifications

• Small, lightweight design
• Built-in Bluetooth, WiFi and radio technology
• Trimble xFill RTK service pre-installed; option to upgrade to CenterPoint® RTX or OmniStar® services
• 672-channel GPS, QZSS, GLONASS, Galileo, BeiDou (Standard: GPS L2C and QZSS signals; Optional upgrade: GLONASS, Galileo, BeiDou and triple frequency)
• 4 SBAS channels
• Autobase technology for rapid and automated daily base station setups
• Operates within a VRS network for conventional base station-free rover capability

Specifications

• Full-function user interface for onsite setup, configuration and troubleshooting
• Diagnostic data for solving signal strength challenges
• Channel bandwidth options of 12.5 or 25 kHz

Specifications

• Automatically steers your vehicle with one-inch repeatability (requires compatible positioning services, including CenterPoint® RTX or an RTK or VRS network)
• Integrates directly into your vehicle’s hydraulics
• Plugs into most guidance-ready vehicles
• Maximum speeds of up to 30 mph (40 kph)
• T3 terrain compensation
• NextSwath auto headland turning compatible

Specifications

• Electric, hands-free, automated steering system
• Sub-inch accuracy from the NavController III, which uses T3™ sensors to calculate the actual position of the vehicle, minimizing skips and overlaps in areas with rolling terrain, slopes and rough ground
• Operates at slow speeds and in reverse
• NextSwath auto headland turning compatible

Specifications

• Electric, hands-free, assisted steering system
• T3™ sensors calculate the actual position of the vehicle to help minimize skips and overlaps in areas with rolling terrain, slopes and rough ground
• Option to move between unrestricted manual and assisted steering
• Easy to move from machine to machine

• T3™ sensors calculate the actual position of the vehicle to help minimize skips and overlaps in areas with rolling terrain, slopes and rough ground
  
• NextSwath™ 2 end-of-row turn technology (available when used with the NAV-900 guidance controller)
• Vehicles can be engaged in reverse for up to 15 seconds
• Vehicles stay engaged while stopped for up to 15 seconds
• Easy to move from machine to machine

Specifications

• Hands-free guidance for many farm vehicle types
• Locks away from the steering wheel when not in use and quickly disengages when you manually turn the steering wheel
• T2® sensors calculate the actual position of the vehicle to help minimize skips and overlaps in areas with rolling terrain, slopes and rough ground
• Easiest to move between machines, over 1200 vehicle models supported

Specifications

• Uses existing row guidance sensors to sense the position of the combine
• Utilizes terrain compensation technology on the Autopilot system for high-accuracy steering in rolling hills, slopes, and rough terrain

Specifications

• Corrects implement position independently from the tractor’s guidance path for separate calibration and trim adjustments, multiple guidance patterns and individualized steering control
• Utilizes T3 terrain compensation technology for high accuracy on difficult terrain
• Works on any implement that has steerable controls built into the implement’s design, as well as those that don’t by adding aftermarket steering additions
• Requires a GNSS antenna and NavController III on your implement and Autopilot system and the TMX-2050™ display in your tractor

Specifications

• Allows the implement to get on line with movement from the tractor
• Requires a GNSS antenna on your implement and Autopilot™ system and the TMX-2050™ display in your tractor

Specifications

• Full spot spray system
• Intelligent sensor
• Lightweight sensors and cabling
• Weed mapping and automatic section control
• Automatic turn compensation
• Universal mount for easy installation
• Works with any ISOBUS-compatible display
• Up to 25mph spray speeds day or night 
• Quick calibration

Specifications

• Variable rate application control powered by Trimble’s Rawson® drives
• Automatic section control with option to add Tru Count Air Clutches® and Tru Count LiquiBlock™ Valves
• Seed monitoring
• Spinner speed control
• NH3 rate and sectional control

Specifications

• Provides both rate and section control functions
• Connects to the implement with any ISOBUS terminal after ECU configuration
• Liquid, NH3 and granular applications.
• Full ISOBUS communication

Specifications

• Compatible with any ISOBUS display
• Real-time, field-specific weather monitoring
• Record archive
• Configurable alarms for certain conditions

Specifications

• High-quality optical sensor instantly measures plant vigor
• Easy-to-read display, even in full sunlight
• Simple pull-type trigger and comfortable hand grip
• Bluetooth connectivity to your mobile device
• Micro-USB charging port

Accuracy

• ViewPoint RTX 12in Pass to Pass
• RangePoint RTX 6in Pass to Pass
• CenterPoint RTX 1in Pass to Pass
• CenterPoint VRS 1in Pass to Pass

Specifications

• Includes FieldLevel II Survey and Design module installed on TMX-2050™ display
• Leveling components installed directly to the tractor’s hydraulic system or onto grading equipment
• 2D and 3D design options
• Options for complete levee design/guidance or manual guidance along a contour

• Surface and subsurface drainage options
  
• Includes both software and hardware components
• T3™ Enhanced Terrain Compensation Technology facilitates roll-corrected 3D positioning
• Offers wireless data transfer between the farm office, vehicles and workers in the field

Value

• Organize display data to ensure field work is executed correctly
• Save time collecting and sharing job data from the display
• Access real-time information to more effectively run operations
• Optimize operational efficiency by managing daily work and monitoring field activities

Features

• View data from any angle and exaggerate the vertical to visualize field shape and slope
• Determine various watershed zones to assist with main, submain and lateral pipe placement
• Configure contours at any interval to help visualize topography and relative elevations
• Enable flow arrows and tributary lines to assist with tracing natural surface water flows
• Layer field analysis with aerial images
• Produce optimal depth designs for more consistent water tables using Autoslope feature
• Calculate the recommended pipe size for all pipes within a given design and verify that pipe network will successfully drain prior to installation
• Installs on desktop computers using Microsoft® Windows® 7 or above